How to Setup the Defender Guard Camera (IP4MCB1)

How to connect your Defender Guard 4MP camera With your phone connected to the same Wifi
network that you will connect the camera to, open the Defender Guard app and press the
plus sign in the top right. Make sure that you are connected to the 2.4ghz
network. The Defender Guard camera does not work on
5G wi-fi networks. Scan the QR code on the camera. It is located on the bottom of the camera. Your camera needs to be plugged into a power
outlet to connect. Enter your Wifi password. Make sure your camera is connected to the
same wi-fi When the LED on the front of your camera is
flashing green, tap the checkbox next to “The green light is flashing slowly,” and tap Next Turn up the volume on your phone, and keep
it close to the camera. The camera will connect to the app. Create a device password. It must be between 8 and 32 characters and
be a combination of numbers and letters. We recommend making a note of the password
because it is difficult to retrieve if forgotten. Your camera is now ready to go. On this screen, you can change the name of
your camera, as well as change your time zone, and turn on, or off, daylight savings time. Tap Complete and you will be taken to the
Device screen. Tap the cameras play icon to see the live

Leave a Reply

Your email address will not be published. Required fields are marked *